The uprights for installing electric fence posts are usually wooden stakes or special plastic poles. When using wooden stakes, first cut one end of the stake into an axe shape, use a hammer and mallet to drive it directly into the planned position, and then install the insulator.
The conductive fence wire mostly uses 12# galvanized iron wire or bare aluminum stranded wire. After the wire is unfolded, it can be tensioned to a certain extent by hand, without the need for a wire tensioner. Since the electric fence post is a temporary grass facility, the wire should be easily removed when fixed on the insulator. Therefore, the insulator can be made into a bayonet type and the binding is firm.