Installation steps of stainless steel glass door handle:
① Choose a glass door stainless steel handle that meets the opening distance of the handle, and check whether the parts and the opening can be tightly connected. If it is too tight, use a drill to expand it carefully. If it is too loose, just wrap tape around the part.
② First disassemble the stainless steel handle of the glass door, and then assemble it at the handle hole. Apply some glass glue to the position where it is inserted into the hole. The root of the connection.
③ After the glass door and the handle are connected, install the other parts of the glass door stainless steel handle, and then adjust the horizontal position. The handles on both sides of the door must be aligned, and the handles of the two doors must be aligned. Finally, check that all parts are installed firmly, and it can be used normally.