Installation procedure of pipe clamp: Before assembling on the welding board, in order to better determine the direction of the clamp, it is recommended to mark the fixing place first, then weld on the welding, insert the lower half of the pipe clamp body, and put it on Fixed pipe. Put on the other half of the pipe clamp body and cover plate and tighten them with screws. Never directly weld the bottom plate with the pipe clamp installed.
Fold up assembly, the guide rail can be welded on the foundation, or fixed with screws, first install the upper and lower half of the pipe clamp body, put the pipe to be fixed, and then put the upper half of the pipe clamp body, fixed with screws, through the anti-loosening cover plate Prevent it from turning. Then install the second pipe clamp in the same way as above.
Assembling the elbow, when assembling the elbow, it should be directly fixed with Yongsheng pipe clamps at the front and rear of the elbow. It is recommended that such a support point should be a fixed position.