You are currently viewing Do you know the precautions for glass door hinge installation?

Do you know the precautions for glass door hinge installation?

  • Post author:
  • Post category:News
  • Post last modified:January 8, 2019

1. Pay attention to the installation location and quantity. In theory, the larger the distance between the two hinges, the stronger the bearing capacity. Of course, this also takes into account the reality. The home door leaf can be used with three hinges, and the general door can be used with two hinges.

2. Prevent the falling fan. The falling fan means that the installation of the door and window is poor, and the upper gap gradually increases and the lower gap gradually becomes smaller, resulting in poor switching, and will fall off in severe cases. This may be caused by the choice of hinges that are too small or that do not use the matching screws.

3. Grasp the gap distance. The gap between the hinge and the door panel must be well grasped, otherwise the appearance will be difficult to see, the gap of the door panel is normally 3-5MM, and the expansion joint should be left.

4. Make sure the parts match. Whether the hinge groove and the hinge height, width and thickness match. Whether the hinge and the screws and fasteners connected to it are matched. The connection of the hinge should match the material of the frame and the fan. For example, the hinge used for the steel frame wooden door, the side connected to the steel frame is welded, and the side connected with the wooden door fan is fixed by wood screws.

For the knowledge about the installation method of the glass door hinge, we will introduce it to you here. After reading the above short steps, did you find that the hinge installation is actually very simple? So even if it is a different type of hinge, you can combine the above description and the instructions on the manual to understand the installation skills.