Detailed explanation of the installation steps of gymnastic floor spring:
① Laying moisture-proof film
Before paving the moisture-proof mat, firstly lay a 0.2mm thick PE moisture-proof film. The moisture-proof film needs to be laid straight and the joints overlapped by 300 mm, sealed with 60mm wide tape, and compacted. Lead up 30-50mm from the side of the wall, but it needs to be lower than the height of the skirting line
②Laying floor mats
The thickness of the floor mat is not less than 2mm (3mm is better). During installation, the floor mats cannot be overlapped. The joints are sealed with 60mm wide tape and compacted. The floor mats need to be laid straight, 30-50mm above the wall, lower than the height of the skirting line.
③Pre-laying and sorting
Before paving, all the floors are disassembled, and the floors are pre-laid and sorted, separated by dark and light colors, and the paving plan is communicated with the customer. The end of the packing box is marked with a small red dot, and there is a short board inside. The short board is used first during paving, and the long board is cut after the short board is used.