You are currently viewing Glass door wooden handle installation

Glass door wooden handle installation

  • Post author:
  • Post category:News
  • Post last modified:June 9, 2021


Glass door wooden handle installation, 1. Pay-off positioning: The glass door combined by fixed glass and movable glass door leaves is unified for pay-off positioning.

2. Limit slot at the top of the installation frame: The width of the limit slot should be greater than the thickness of the glass by 2-4mm, and the slot depth should be 10-20mm. When installing, first draw out the two metal decorative board edges from the center of the bullet, and then install the limit slot on the top of the door frame according to the edge lines.

3. Install the wooden bottom bracket of the metal veneer: first fix the square wood on the ground, and then glue the metal veneer to the wood with all-purpose glue. The square wood can be directly nailed to the embedded wooden bricks or through expansion bolts. The connection method is fixed.