You are currently viewing Double side glass door lock installation method

Double side glass door lock installation method

  • Post author:
  • Post category:Uncategorized
  • Post comments:0 Comments
  • Post last modified:May 14, 2021

Double side glass door lock installation method:

1. Positioning of wire release: At the beginning of installation of frameless glass doors, the fixed glass partition and movable glass door leaf must be uniformly placed on wire. After determining the position of the door frame, accurately measure the ground elevation and the elevation of the top of the door frame.

2. Install the limit slot on the top of the frameless glass door frame: two metal decorative board edges are drawn from the center line of the bomb, and then install the limit slot on the top of the door frame according to the edge lines.

3. Install the wooden bottom bracket of the metal finish of the frameless glass door: nail the square wood on the original embedded wooden bricks, or nail the square wood through expansion bolts, fix the square wood on the ground, and then glue the metal veneer panel with universal glue On the wooden side.

4. Install the hard-facing door frame: nail the square wood of the door frame according to the center line of the bullet, and then use plywood to determine the shape and position of the door frame column. When it is fixed, the metal decorative surface is covered.

5. Installation of the glass door leaf of the frameless glass door: Use a glass suction cup (or glass suction cup machine) to suck the thick glass tightly, and then hold the suction cup to lift the thick glass plate by 2 to 3 people and move it upright. The installation site is ready to be in place.

Leave a Reply